Heavy Duty Analytical Sieve Shaker

ANALYSETTE 18

OVERVIEW

Effective sieving of large quantities

The ANALYSETTE 18 is the robust, Heavy Duty Analytical Sieve Shaker from FRITSCH. It can effortlessly sieve up to 15 kg of material between 20 μm and 125 mm. The three-dimensional sieving motion ensures particularly fast sieving results without manual re-sieving, and also optimal reproducibility.
The ANALYSETTE 18 is used for particle size analysis and portioning of coarse-grained materials. The maximum input quantity of 15 kg for the material to be sieved and the sieve stack also allows use in pilot line production or for serial analysis of large quantities.
It is particularly suitable for particle size analysis and portioning of coarse-grained materials through dry sieving or wet sieving with conversion kit.

 

WORKING PRINCIPLE
  • The ANALYSETTE 18 is a Heavy Duty Analytical Sieve Shaker that was specially designed for processing of large sieving quantities. It intentionally avoids the disadvantages of lighter sieve shakers in which the sample and sieve weights can sometimes significantly affect the sieving results. Two unbalanced motors situated in phase opposition under exactly defined angles create optimal vibrations of the test sieves mounted to the sieve plate. After elapsing of the sieve time, both motors are precisely braked.
    With this construction the sieving material is not only accelerated vertically, but also horizontally. This three-dimensional sieving action ensures a permanent change of direction of the material. This results in a short sieving time and increased separation efficiency without manual re-sieving and optimal reproducibility.

     
  •  
FEATURES
  • Material quantity up to 15 kg in a measurement range of 20 µm – 125 mm
  • Three-dimensional sieving action for fast sieving results, without manual re-sieving, optimal reproducibility
  • Conversion kit for wet sieving
  • Universal support plate for sieves dia. 300, 315, 350, 400, 450 mm respectively 12″ – 18″ (adapter for sieves 200 mm respectively 8″ dia. required)
  • Automatic amplitude control with continuous acceleration measurement of the whole sieve stack
  • Operation by remote control via a separate, handy operating unit
  • TwinNut fastening system for sieves and clamping lid ensure constant tensioning pressure and stability
  • Up to 12 test sieves (65 mm height) with sieve pans and lid can be used per working cycle
  • Multilingual AUTOSIEVE programme for automatic evaluation, monitoring, documentation of results
  • Sieves can be calibrated according to ISO 9001
  • Robust design for heavy-duty operating conditions
  • Two maintenance-free unbalanced motor
  • Sieves in mesh widths available from 20 µm to 125 mm according to ISO 3310-1, ASTM E-11-1995

VIEW EXTENSIVE ACCESSORIES

SOFTWARE AUTOSIEVE

For automatic evaluation of your sieving results

The multilingual software AUTOSIEVE for automatic evaluation, simple monitoring and documentation of your sieving results can be downloaded here and tested non-binding and free of charge for 90 days.
All you have to do is to connect a analysis balance and then weigh the sieves before and after sieving using differential weighing. AUTOSIEVE will do the rest. The software enables the simple saving and retrieving of empty sieve weights, both of single sieves and complete sieve sets.

DETAILS AUTOSIEVE

EQUIPMENT / ACCESSORIES

Everything you need for sieving

The Heavy Duty Analytical Sieve Shaker ANALYSETTE 18 is delivered incl. tensioning, clamping lid for dry sieving and software AUTOSIEVE (90 day test version free of charge), but does include not test sieves or sieve pan, which are offered in various designs and must be ordered as accessories.
Also available is a conversion kit for dry sieving.

VIEW EXTENSIVE ACCESSORIES

Booking Demo

AT A GLANCE

  • Dry and wet sieving
  • Automatic sieve evaluation with software AUTOSIEVE
  • Usable as testing equipment in accordance with DIN EN ISO 9001
  • Three-dimensional sieving action

IDEAL FOR

SIEVING

MEASURING THE QUANTITATIVE

PARTICLE SIZE DISTRIBUTION OF

SOLIDS AND SUSPENSIONS

SEPARATING

FRACTIONING

TECHNICAL DATA

Working principle

impact force

Optimal for material type

hard, medium-hard, brittle

Number of grinding stations
2
Grinding tools

grinding bowls and grinding balls

Materials of the grinding tools

agate, sintered corundum, silicon nitride, zirconium oxide, hardened stainless steel, hardmetal tungsten carbide

Grinding bowl sizes

20, 45, 80 ml

Grinding ball diameter

0.1 – 20 mm

Max. feed size (depends on material)

5 mm

Min. sample quantity
15 ml
Max. sample quantity

60 ml

Final fineness (depends on material)
< 0.1 µm
Typical grinding time down to analytical fineness
3 min
Grinding process

dry/wet

Grinding in inert gas
yes
Gas pressure and temperature measurement
yes
Rotational speed of main disk

100-1100 rpm

Transmission ratio planetary disk / grinding bowl
relative = 1 : -2
Effective diameter of main disk

140 mm

Centrifugal acceleration (g = 9.81 m/s²)

95 g

Interfaces

USB

Electrical Details, additional voltages available upon request

100-120 V / 200-240 V/1~, 50-60 Hz, 1200 Watt
voltage, indicated by customer is set

Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, grinding bowls/balls, selected rotational speed)
LpAd = 80 dB
Weight

44 kg

Dimensions (W x D x H)

bench top instrument 40 x 58 x 36 cm

Booking Demo