Vibratory Sieve Shaker

ANALYSETTE 3 SPARTAN

OVERVIEW

Simple Sieving for all tasks

The little sister of the ANALYSETTE 3 PRO for all typical sieving tasks in the laboratory with optical adjustment of the amplitude on the running instrument. Complete with the practical FRITSCH sieve stack tensioning system EASYTWIST and the possibility of automatic evaluation of the sieve analysis using the extensive FRITSCH evaluation software AUTOSIEVE.
The ANALYSETTE 3 SPARTAN is also suitable for quantitative particle size analysis of solids and suspensions of all kinds through dry or wet sieving with woven test sieves.
It is convertible into a micro mill for fine comminution of dry laboratory samples or solids in suspensions and for homogenisation of emulsions or pastes.

 

WORKING PRINCIPLE

The ANALYSETTE 3 is a “shaking sieve” system in the classic sense in which an electromagnetic drive causes the sieves to oscillate in a vertical direction. The material to be sieved is periodically propelled upward off the sieve fabric and forced through the mesh of the attached test sieve as it falls back down.

FEATURES
  • Automatic sieve analysis with sieve evaluation software AUTOSIEVE
  • Quick conversion to Vibratory Micro Mill PULVERISETTE 0
  • Exact entry of the sieving time via a precise digital timer
  • Manual adjustment of the amplitude during sieving
  • Display of the amplitude during sieving
  • Ergonomically installed robust soft touchpad
  • EASYTWIST sieve stack tensioner with steel-reinforced plastic bands is included
  • Optimum power consumption prevents warming up of the sieving system
  • Up to 10 test sieves can be used simultaneously per working cycle – allowing up to 5 sieving operations to be performed at the same time

VIEW EXTENSIVE ACCESSORIES

SOFTWARE AUTOSIEVE

For automatic evaluation of your sieving results

The multilingual software AUTOSIEVE for automatic evaluation, simple monitoring and documentation of your sieving results can be downloaded here and tested non-binding and free of charge for 90 days. All you have to do is to connect a laboratory analysis balance (like for example the laboratory analysis balance up to 4.1 kg, order no. 03.2600.00) and then weigh the sieves before and after sieving using differential weighing. AUTOSIEVE will do the rest. The software enables the simple saving and retrieving of empty sieve weights, both of single sieves and complete sieve sets.

DETAILS AUTOSIEVE

YOUR SIEVE SHAKER BECOMES A MILL

Sieving and comminution in one unit

With just a few motions, your Sieve Shaker can be transformed into the Vibratory Micro Mill PULVERISETTE 0 for grinding and homogenising small sample quantities (filling volume 1 to 10 ml, feed particle size < 5 mm). And with the special FRITSCH cryo-box, grinding is even possible at low temperatures with liquid nitrogen.

DETAILS ABOUT THE PULVERISETTE 0

EQUIPMENT / ACCESSORIES

Everything you need for sieving

By default the Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN is delivered incl. tensioning and the software AUTOSIEVE (90 day test version free of charge), but it does not include clamping lid, test sieves or sieve pan, which are offered in various designs and must be ordered as accessories.
Also available as an accessory is the universal sieve tensioning system TorqueMaster for automatic and reproducible tensioning of the sieve stack on the Sieve Shaker.

VIEW EXTENSIVE ACCESSORIES

Booking Demo

AT A GLANCE

  • Dry and wet sieving
  • Automatic sieve evaluation with software AUTOSIEVE
  • Fast, reproducible results
  • Simple ergonomic operation

IDEAL FOR

SIEVING

MEASURING THE QUANTITATIVE

PARTICLE SIZE DISTRIBUTION OF

SOLIDS AND SUSPENSIONS

SEPARATING

FRACTIONING

TECHNICAL DATA

Working principle

impact force

Optimal for material type

hard, medium-hard, brittle

Number of grinding stations
2
Grinding tools

grinding bowls and grinding balls

Materials of the grinding tools

agate, sintered corundum, silicon nitride, zirconium oxide, hardened stainless steel, hardmetal tungsten carbide

Grinding bowl sizes

20, 45, 80 ml

Grinding ball diameter

0.1 – 20 mm

Max. feed size (depends on material)

5 mm

Min. sample quantity
15 ml
Max. sample quantity

60 ml

Final fineness (depends on material)
< 0.1 µm
Typical grinding time down to analytical fineness
3 min
Grinding process

dry/wet

Grinding in inert gas
yes
Gas pressure and temperature measurement
yes
Rotational speed of main disk

100-1100 rpm

Transmission ratio planetary disk / grinding bowl
relative = 1 : -2
Effective diameter of main disk

140 mm

Centrifugal acceleration (g = 9.81 m/s²)

95 g

Interfaces

USB

Electrical Details, additional voltages available upon request

100-120 V / 200-240 V/1~, 50-60 Hz, 1200 Watt
voltage, indicated by customer is set

Emission sound pressure level at the workplace according to DIN EN ISO 3746 (depending on the material to be ground, grinding bowls/balls, selected rotational speed)
LpAd = 80 dB
Weight

44 kg

Dimensions (W x D x H)

bench top instrument 40 x 58 x 36 cm

Booking Demo