Disk Mill

PULVERISETTE 13

premium line

AT A GLANCE

  • Fine grinding down to 0.05 mm
  • Easy motor-driven grinding gap adjustment
  • Easy operation and cleaning with Clean Design
  • High throughput of up to 150 kg/h, with extra powerful motor

IDEAL FOR

GLASS- AND CERAMICS INDUSTRY

MINING AND METALLURGY

GEOLOGY AND MINERALOGY

CHEMICAL INDUSTRY

SOIL RESEARCH

OVERVIEW

Efficient premium fine grinding

The premium model of the FRITSCH Disk Mill for efficient fine grinding of hard-brittle to medium-hard solids: Even safer due to the automatic locking of the collecting vessel and grinding chamber, even easier to operate due to the convenient motor-driven grinding gap adjustment with digital gap display. A well-designed display shows all of the parameters.
Ideal for medium particle sizes in the areas of mining and metallurgy, ceramics industry, rocks and soils, glass industry, soil research.

 

WORKING PRINCIPLE

Pressure and shearing action

In the Disk Mill, the material to be ground is comminuted by pressure and shearing action between two counteracting grinding disks with coarse interlocking teeth. The ground material automatically falls down through the pre-set grinding gap into the collection drawer. The desired final fineness can be defined reproducibly by simply adjusting the digital setting of the gap width.

FEATURES
  • Feed size 20 mm
  • Max. throughput 150 kg/h with extra powerful motor
  • Rotating speed grinding disk 440 U/min
  • Fine grinding down to 0.05 mm
  • Motor-driven grinding gap adjustment in 0.05 mm steps
  • Especially safe due to automatic safety locks for locking grinding chamber and drawer
  • Easy cleaning and  optimal material feeding due to large removable plastic funnel
  • Clean Design: smooth grinding chamber inner surfaces and labyrinth sealing of grinding chamber ensure a fast cleaning an protection against contamination of the sample
  • Dust-free grinding due to connection of dust exhaust system and special sealing of drawer
  • Automatic safety locks for clamping the lock and grinding chamber drawer automatically
  • Precise motor-driven adjustment of distance between grinding disks of up to  50 µm accuracy
  • Motor-driven zero point adjustment for compensating wear on grinding disks and precise re-adjustment after replacement
  • Longer service life of grinding disks via the control display
  • Easy change of the grinding disks
  • Combinable with the Jaw Crusher PULVERISETTE 1 premium line

VIEW EXTENSIVE ACCESSORIES

EQUIPMENT / ACCESSORIES

Configure your Disk Mill PULVERISETTE 13 premium line exactly to your specific application

For every FRITSCH Disk Mill PULVERISETTE 13 premium line, you need at least one fixed and one movable grinding disk. These are available in 4 different materials. Normally, two grinding disks of the same material are selected which must always be harder than the sample to be ground.

Metal-free grinding

Ideal for medical and dental engineering: On request, we can equip your PULVERISETTE 13 premium line with a complete polymer interior coating together with grinding disks made of zirconium oxide – the perfect pre-requisite for grinding without any contact of the sample with metal.
VIEW EXTENSIVE ACCESSORIES

The premium combination for integrated pre- and fine-grinding

For especially fast continuous premium pre- and fine-grinding of large quantities of coarse material, the combination of the Disk Mill PULVERISETTE 13 premium line and the Jaw Crusher PULVERISETTE 1 premium line is the ideal solution. Together, they form an efficient, heavy-duty, high-performance grinding instrument with integrated Riffle Sample Splitter. This gives you the full range of opportunities for optimal sample preparation with a feed size of up to 95 mm and final fineness of down to 0.05mm – all in a single step.
READ DETAILS ABOUT THE COMBINATION OF DISK MILL PULVERISETTE 13 PREMIUM LINE AND JAW CRUSHER PULVERISETTE 1 PREMIUM LINE